Abus RWM90 Manuel Utilisateur page 21

The smoke detector works optically by measuring smoke particles that penetrate
into its measurement chamber.
When the alarm threshold is exceeded, a loud alarm sounds.
The alarm is switched off as soon as there is no more smoke in the measuring
chamber.
• Surveillance area: 40 m
• Battery operated (1 x 3 V battery)
• Automatic battery state monitoring
• Battery compartment check (the smoke detector
can only be installed when the battery is fitted)
• Optical LED indicator lamp and acoustic alarm
• Simple installation
RWM90_MA_DEGBFRNLIT_103x103_AJ.indd 21
Warning
• The smoke detector does not detect gas, steam, heat or fire/flames.
Detectors with special sensors are required for this.
• People with hearing impairments may not be able to hear the alarm.
Special alarms with visible signalisation are available for such cases.
• Smoke detectors help save lives. Therefore, for safety's sake, you should
regularly test the battery and the operation of the detector. For day-to
day use, remember that the smoke detector cannot prevent fires but
simply provides signalization in the event of one. For your own safety,
please replace smoke detectors every ten years at the latest.
• Very high electromagnetic radiation can cause malfunctions. Therefore,
do not install the detector near strong magnets or devices which
produce electromagnetic radiation.
within a room
2
– 21 –
Safety information
GB
30.09.19 13:20