Safety Switch - Foster 7390/945 Manuel D'installation Et D'utilisation

using the cooktop
the symbol ''Melt-Simmer", then press again and hold on until the Simmer
symbol lights up besides the cooking zone display.
• Power Boost
This program further reduces the cooking time of a certain cooking zone, by
bringing the temperature to the maximum heat level for 10 minutes.
At the end of this timeframe, the cooking zone heat level will automatically go
back to level "9". The use of this function is recommended for heating large
quantities of liquids (e.g. water to cook pasta) or food in a very short time.
To activate this program, switch on your cooking zone and slide right on the
slidebar until you reach level ''9'' then press the Power boost key. An acoustic
signal will be heard, and the ''P'' symbol will be shown on the cooking zone
display.
• Automatic warm-up
All cooking zones are equipped with an automatic warm up function. This
feature sets the cooking zone to the highest heat level for a certain period of
time and then automatically switches back to the cooking setting that was
originally set.
The lenght of time that the automatic warm up function operates depends on
the heat setting selected.
To activate the warm up function on a cooking zone place your finger on the
slidebar at the desired heat level an hold the position until the symbol ''A'' ,
alternating with the selected heat level, appears on the cooking area display.

Safety switch

The appliance has a safety switch that
automatically switches off the cooking
zones when they have been operating
for a certain amount of time at a given
heat level. In case of hot surface the
residual heat symbol "H" is displayed.
14
HEAT LEVEL OPERATING
TIME LIMIT (hours)
1 - 2 6
3 - 4 5
5 4
6 - 7 - 8 - 9 1,5