Display Symbols And Leds; Display Description; Residual Heat Indicator - Foster 7371/945 Manuel D'installation Et D'utilisation

using the cooktop

Display symbols and leds

Display Description

active function led - indicates that the corresponding function/zone
is active
timer/egg timer led - cooking zone timer active / egg timer active
bridge led - indicates that the bridge function is active
melt led - indicates that the ''melt'' program is active (the cooking
zone heat level is set at 70°/158°F)
simmer led - indicates that the ''simmer'' program is active (the
a 4
cooking zone heat level is set at 94°C/201,2°F)
0 4
no timer setting made
1 4 9 4
the cooking zone is on and ready to be set
-
active cooking zone heat level
0 2 5
0 4
Timer display
pot detection - cookware is unsuitable, too small or no cookware
h 4
has been placed on the cooking zone
p 4
residual heat - indicates that the cooking zone is still hot. Warning!
a 4
power boost function is activated
e 4
automatic warm-up function is activated
+ digit error - malfunction has occurred. (Refer to ''troubleshooting''
chapter)
WARNING! RISK OF BURNS FROM RESIDUAL HEAT
Tips: Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the
base of the cookware. The glass ceramic is merely heated by the residual heat
of the cookware. The cooling fan switches itself on and off depending upon the
10
temperature of the electronics.

Residual heat indicator

After being switched off, the cooking zones need
some time to cool down.
Look at the residual heat indicator.