Cata ControlAir C1-T600 Instructions Pour L'installation, L'utilisation, L'entretien page 20

EN
Dear Customer,
Thank you for buying our hood. Please read these instructions carefully for its
optimum installation, use and maintenance.
This appliance has been designed and manufactured exclusively for use at home.
In order to ensure optimal installation, use and maintenance of the appliance,
we recommend that you read these instructions carefully.
Check the appliance before installing it. Do not use the hood if it is damaged or
faulty. If this is the case, please contact your distributor or installer.
Warning: You must comply with existing legislation on emission of fumes
and environmental ventilation. Do not connect the hood to another vent for
smoke, ventilation or hot air which is already being used by other appliances
that are fuelled by gas or another fuel.
For optimal and safe performance, the pressure in the room should not drop by
more than 4 Pa (0.04 mbar). For this purpose, sufficient permanent air inlets
should be provided to prevent the premises from being sealed.
If a kitchen extractor hood and appliances fuelled by gas or another fuel are
used simultaneously, there must be an appropriate ventilation system in the
room.
Connecting the hood to the grid
Warning: before connecting the hood: shut off the power supply and check
that the voltage and frequency supply matches that indicated on the rating
plate of the equipment.
If the appliance is equipped with a plug, connect the hood to a socket located in
an accessible area which is compliant with existing standards.
If the appliance is not equipped with a plug, connect the appliance directly to
the power grid, protected by an omnipolar separating device which can be ac-
cessed to disconnect it, in accordance with local regulations.
If the power cable is damaged, it must be replaced by the manufacturer through
its post-sale service, or by similar, qualified personnel in order to prevent danger.
20
SAFETY