Reversing Door - GE GTH21 Série Manuel D'utilisation Et D'installation

TRANSFER DOOR STOPS
5
On each door, move the metal door stop from the
right to the left.
Move any screws from the left to the right.
Door Stop
Left Side

REVERSING DOOR

6
HANDLES –
TRANSFER
FREEZER DOOR
HANDLE TO THE
RIGHT SIDE OF THE
REFRIGERATOR
DOOR
1. Remove the two screws
securing the bottom end
of the handle with a
Phillips screwdriver.
2. Rotate the handle
out and lift off of
the mounting
screw on the
freezer door.
3. Remove the mounting
screw from the surface
of the freezer door.
Installation Instructions
Door Stop
Right Side
REVERSING DOOR HANDLES –
6
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT SIDE OF
THE REFRIGERATOR DOOR
(CONT.)
4. Insert the mounting
screw into the surface
of the right side of the
refrigerator door with
a Phillips screwdriver.
5. Align the handle with
the mounting screw.
6. Push the handle down.
7. Secure the top end of
the handle by inserting
two screws and tightening
them with a Phillips
screwdriver.
NOTE: Do not over-tighten.
23