Siemens TE809 Serie Mode D'emploi page 54

Masquer les pouces Voir aussi pour TE809 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
Cleaning
Duration: approx. 8 minutes.
Clean
The start button 8 flashes while the
different cleaning processes are running.
The figures on the top right indicate the
progress of the programme.
● Fill the water tank 11 up to the "max"
mark.
à
● Press the
button 3.
Clean ▶ start
● Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it.
Position swivel arm
● Swivel the coffee outlet 9 to the left until it
clicks into place.
Cleaning
Open powder compartment
● Open the powder compartment 18.
Insert Siemens cleaning tablet and
close powder compartment
● Drop a Siemens cleaning tablet into the
drawer 18 and close it.
Press start
● Press the start button 8. The clean-
ing programme will now run for about
7 minutes.
Cleaning
50
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it.
▶ start
The appliance is ready for use again.
calc'nClean
Duration: approx. 36 minutes.
calc'nClean combines the separate
functions of descaling and cleaning.
If both programmes are due to be run
soon, the espresso machine automatically
suggests this service programme.
calc'nClean
The start button 8 flashes while the
different calc'nClean processes are running.
The figures on the top right indicate the
progress of the programme.
Important: If there is a water filter 29 in
the water tank 11, it needs to be removed
before the service programme is run.
● Press the
c alc'nClean ▶ start
● Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it.
● Swivel the coffee outlet 9 to the right until
it clicks into place.
à
button 3.
▶ start

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Te809 deTe809 rw

Table des Matières