Siemens TE809 Serie Mode D'emploi page 39

Display
The display 5 uses symbols to indicate
the selection options, coffee strength and
per-cup quantity, and uses text to indicate
settings, ongoing processes and messages.
The rotary knob 6 and selection buttons
4 can be used to change settings. The
selected setting is highlighted by a frame.
Espresso
Example:
The status line 5a shows the name of the
type of drink, along with the strength setting
55
and per-cup quantity
The selection line 5b shows symbols for
drink selection.
The arrows in the navigation line 5c indicate
the direction in which more menu levels can
be found.
Please refer to "Displays" for more detailed
information.
Start button
Press the start button 8 to begin drink
preparation or to start a service programme.
Press the start button 8 again during drink
preparation to stop the dispensing process
prematurely.
5a
5b
5c
.
Î
j
button and settings
j
Use the button 7 to display information
(press briefly) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
● when should the next service be
completed.
● how many drinks have been dispensed
since the espresso machine was
switched on.
j
button 7 briefly and navigate
● Press the
< >
with the and
Descale after
Clean after
Change filter in
No. of coffees
No. of milk mixes
Amount hot water
* appears only if the filter is activated.
j
Press the button 7 briefly to return to the
drink selection. If no button is pressed for
about 10 seconds, the appliance automati-
cally switches back to drink selection mode.
Adjusting settings
See "Menu settings".
buttons 4.
Info
150
200
200
Info
en
*
11
15
2 l
35