EIBENSTOCK END 1550 P Notice Originale page 18

Technical Data
Diamond Wet Drill END 1550 P
Rated voltage:
Rated power input:
Rated current:
Order number:
Frequency:
Drilling diameter
Thread connection:
Rated speed:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Subject to technical changes!
Available add-ons:
Item
Diamond drill bits
Usable length: 40mm Ø 22-68 mm for tiles a. natural stone
Usable length:300mm Ø 08-31 mm for reinforced concrete
Diamond drill bits
Usable length: 30mm Ø 6-18 mm for tiles a. natural stone
Usable length: 30mm Ø 6-12 mm for concrete a. brickwork
Usable length:100mm Ø 6-12 mm for concrete a. brickwork
3 Spare seals for quick-change adapter
Centering device with water collection and
one set of guide rings
Spare seal for centering device
Guide rings
Drill rig BST 50 V with 2 suction feet
Water suction hose ½", 5 m, Gardena connector as well as
adapter for wet/dry vacuum cleaner
For further information about our products and our wide range of
accessories please see: www.eibenstock.com
Diamond wet drill with PRCD protective switch integrated in the cable,
Quick-change adapter G½"a / G½"i, adapter G½" / M12x1,5 a and
operating instructions in a case for transport.
R½" a
M 12 x 1,5 i
Supply
230 V ~
1500 W
6,8 A
03114
50 - 60 Hz
6 – 68 mm (optimal to 50 mm)
G ½" i
1800-4400 rpm
II
IP 20
about 3,6 kg
EN 55014 and EN 61000
18
110 V ~
1500 W
0311J
Order No.
35125
35836
35842
09645
35837