Hornbach 6145053 Manuel D'installation Et De L'utilisateur page 104

Vertical awning 1x
The distance between the out-
sides of the mounting brackets 1
on the installation site is 120 cm.
Mounting bracket 2x
The mounting brackets 1 must
be installed level and at least
150 cm above the ground.
The distance between the in-
sides of the mounting brackets 1
is 111 cm.
Mark the installation holes of
the mounting brackets 1 on the
According to your wall type, drill
the holes and install the fasten-
Install the mounting brackets
1 at the fastenings and check
them for secure fixation.
Alternatively the mounting
brackets 1 can be installed to
a ceiling, using its two upper
104 | ENGLISH
1
2
wall.
3
ings.
holes.