Overview; Operation - Bosch MFQ35 Série Notice D'utilisation

MFQ35.book Seite 11 Mittwoch, 29. Oktober 2014 1:43 13

Overview

Please fold out the illustrated pages.

Fig.
Base unit
1 Ejector button
For removing the tools
2 5-step switch + fast and continuous

operation

For switching the appliance on and off
and adjusting the operating speed.
0/off = switched off
1 = slowest speed
5 = fastest speed
M = Instantaneous switching (maximum
speed) press to the left and hold in place
3 Power cord
4 Rear aperture with catch
for inserting accessories, e.g. high-speed
hand blender
5 Release buttons
for removing accessories from the rear
aperture. Press both buttons simul-
taneously.
6 Apertures for inserting the tools
Tools
7 Stirrer
8 Kneading hook
some models:
9 High-speed hand blender
10 Blender jug
11 Universal cutter
(separate operating instructions)
If the universal cutter or high-speed hand
blender is not included in the product package,
these can be ordered from customer service.
Operation
Base unit with tools
An especially good result is achieved if the
tools are used for the following applications:
Stirrers for ...
... sauces, beaten egg white, mashed
potatoes, crème fraîche, mayonnaise,
cream and light dough, e.g. cake mixture.
Stirrers are not suitable for processing heavy
dough.
Robert Bosch Hausgeräte GmbH
Kneading hook for ...
... stiff mixtures such as short pastry-, yeast
dough- and potato dough as well as for mixing
heavy mincemeat dough, pasta or bread
dough.
The maximum processing quantity is 500 g
of flour and ingredients.
Important information
When the rear aperture is open,
the appliance can be operated using
instantaneous switching only. Selector
switch 1–5 will not function. Open and
close the catch on the rear aperture only
when the switch is in the 0/off position.
Risk of injury from sharp blades/
rotating drive!
Never grip the blade in the blender foot.
Never clean the blades with bare hands.
Use a brush. Never grip the rotating tools.
Do not attach or remove tools until the
appliance is at a standstill – when
switched off, the appliance continues
running briefly.
Protect long hair or loose items of clothing
to prevent them from becoming caught in
the rotating tools.
Before using the appliance for the first

time, clean base unit and tools.
Fig. 
Completely unwind the power cord.

Place the required tool on the base unit

and depress until it locks into position.
Note the shape of the plastic parts to
prevent mixing them up (see Fig.
Insert the mains plug.

Place the food in a suitable receptacle.

Insert tools into the receptacle and switch

on the appliance at the required setting.
Settings 1, 2:
for working in and mixing in.
Settings 3, 4, 5:
for kneading and beating.
After working, set the switch to 0/off and

release and remove the tools with the
ejector button.
Attention:
The ejector button cannot be actuated unless
the switch is in the 0/off position.
en
 -1)!
11