Selecting A Disc; Selecting A Folder; Introduction Of Advanced Operations - Pioneer DEH-P7900BT Mode D'emploi

Available accessories

Selecting a disc

! You can operate this function only when a
multi-DVD player is connected to this unit.
% Press any of 1 to 6 on the remote con-
trol to select the desired disc.

Selecting a folder

! You can operate this function only when a
DVD player which is corresponding to com-
pressed audio playback is connected to
this unit.
% Push MULTI-CONTROL up or down to
select a folder.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL to switch between the
functions in the following order:
During DVD video or Video CD playback
Play mode (repeat play)—Pause (pause)
During CD playback
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—ITS play mode (ITS play)—
ITS memo (ITS input)—TitleInput "A" (disc
title input)
During compressed audio playback
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)
# You can also select the function by pressing
FUNCTION on the remote control.
# To return to the playback display, press BAND.
Function and operation
Play mode, Random mode, Scan mode,
Pause and TitleInput "A" operations are basi-
cally the same as that of the built-in CD player.
Also, ITS play mode and ITS memo opera-
tions are basically the same as that the multi-
CD player.
Function name Operation
Refer to Selecting a repeat play
range on page 17.
But the repeat play range that you
can select is vary depending on
the type of disc or system. The re-
peat play ranges of the DVD
player/multi-DVD player are as
below:
During PBC playback of Video
CDs, this function cannot be oper-
ated.
Play mode
! Disc repeat – Repeat the cur-
rent disc
! Folder repeat – Repeat the
current folder
! Title repeat – Repeat just the
current title
! Chapter repeat – Repeat just
the current chapter
! Track repeat – Repeat just the
current track
Refer to Playing tracks in random
Random mode
order on page 17.
Refer to Scanning folders and
Scan mode
tracks on page 18.
Refer to Pausing disc playback on
Pause
page 18.
Refer to Using ITS playlists on
ITS play mode
page 60.
Refer to Using ITS playlists on
ITS memo
page 60.
Refer to Entering disc titles on
TitleInput "A"
page 18.
Section
03
63
En