Available Accessories; Usb Adapter; Basic Operations; Selecting An Audio File Directly In The Current Folder - Pioneer DEH-P7900BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section
03

Available accessories

USB adapter

Basic Operations

You can use this unit to control a USB adapter,
which is sold separately.
For details concerning operation, refer to the
USB adapter's operation manual. This section
provides information on USB portable audio
player/USB memory operations with this unit
which differs from that described in the USB
adapter's operation manual.
! Optimum performance of this unit may not
be obtained depending on the connected
USB portable audio player/USB memory.
1 WMA/MP3/AAC indicator
Shows the type of file currently playing.
2 Folder number indicator
3 Track number indicator
4 Play time indicator
5 Bit rate indicator
1
Press SOURCE to select USB.
2
Push MULTI-CONTROL up or down to
select a folder.
# You cannot select a folder that does not have
a compressed audio file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3
To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
4
To skip back or forward to another
compressed audio file, push
MULTI-CONTROL left or right.
52
En
Selecting an audio file directly
in the current folder
The operation is basically the same as that of
the built-in CD player.
For details concerning operation, refer to Se-
lecting a track directly on page 16.
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3
Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL to switch between the
functions in the following order:
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)
# You can also select the function by pressing
FUNCTION on the remote control.
# To return to the playback display, press BAND.
# If you do not operate functions within about
30 seconds, the display is automatically returned
to the ordinary display.
Function and operation
Play mode, Random mode, Scan mode and
Pause operations are basically the same as
that of the built-in CD player.

Publicité

Chapitres

Table des Matières
loading

Table des Matières