Télécharger Imprimer la page

Reliable Enviromate E3 Guide D'utilisation page 7

Steam cleaning system

Publicité

Les langues disponibles

Les langues disponibles

HOW TO USE yOUR STEAM CLEANER
1. Remove the water tank cap (6), and fill the tank (6) up to a maximum of 1.5
quarts of water (1.5L or 6 cups). Secure the cap until snug.
2.
Connect the electrical cord to the main power outlet.
3. Connect the flexible tube (12) to the appropriate accessory that you wish to use.
4. Turn the main switch (1) all the way to the right (last position). At this position
the orange ready light will come on when the unit reaches operating pressure.
5. NOTE: Position #1 (steam icon in the middle) is used to exhaust steam only.
The orange steam ready light does not come on when the switch is in the #1
position.
6. During use, the orange steam ready light (3) will alternatively turn on and off.
This is normal, and indicates that steam is being generated in the boiler.
7. Before storage, you must exhaust the steam. To exhaust the steam, set the
switch at the #1 position and press the steam trigger (11) on the steam gun.
8. When you are done, turn the main switch (0) to the off position, and unplug
the unit. Your steamer is now ready for storage.
9. It is safe to leave water in the pressure tank when the steam cleaner is not
in use. If it is for an extended period of time (months) then it is best to flush
out the remaining water. To do so, follow the water removal instructions
as outlined in the maintenance of the boiler section.
THIS MODEL IS PROVIDED WITH THE
FOLLOWING FEATURES
RED CONTROL LIGHT (4)
A red warning light signals that the water needs to be refilled. If you wish to continue
steam cleaning, see the "filling your tank" instructions.
STEAM REGULATION (ON HANDLE)
With the steam delivery adjustment, it is possible to select the steam quantity that
you wish during your cleaning from minimum to maximum.
PRESSURE GAUGE (8)
The pressure gauge indicates the operating pressure of the steam cleaner. If the
needle is in the green section, the product is operating normally. If the needle
is continuously in the red section, reduce amount of steam being used, if this does
not correct the problem the steam cleaner may require service. Please contact
the place of purchase for service.
05

Publicité

loading