Hitachi WR 14DM Instructions De Sécurité Et Mode D'emploi page 26

English
6. Duct Socket:
This is used for tightening bolts and nuts on flange sections of air conditioners, type
ducts, etc.
7. Corner attachment (Model EW-14R)
Use this attachment only when the machine is applied to the nut or bolt at the right
angle.
8. 9.5 mm adapter: Code No. 317383
Use this adapter when using the socket that has a square-head-drive dimensions of 9.5
mm.
9. Bit adaptor: Code No. 991476
This is used for tightening small screws (M6).
NOTE
This adaptor is set only on the anvil (drive angle) of the main unit.
26
Code No.
993658
992613
992615
Fig. 27
Hexagonal width across flats
15/32" (12 mm)
1/2" (13 mm)
9/16" (14 mm)
Fig. 28
Fig. 29
Fig. 30