Troubleshooting - Ryobi P542 Manuel D'utilisation

PROBLEM
Bar and chain running
hot and smoking.
Motor runs, but chain is
not rotating.

TROUBLESHOOTING

cAUSE
1. Check chain tension for
over tight condition
2. Chain oil tank empty.
1. Chain tension too tight.
2. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
For any questions about operating or maintaining your product,
call the Ryobi
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
25 - English
SOLUTION
1. Tension chain. Refer to chain
Tension earlier in this manual.
2. Check oil tank.
1. Retension chain, Refer to chain
Tension earlier in this manual.
2. Refer to Assembling the Bar and
chain earlier in this manual.
3. Inspect guide bar and chain for
damage.
CALL US FIRST
Help Line!
®