Electrical Connection; Operation And Handing; Operating Elements And Displays - Caso Germany WineSafe 12 black Mode D'emploi

12.6 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the
following instructions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate with those of your electrical network. This
data must agree in order that no damages occur in the device. If in
doubt, ask your qualified electrician.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The connection between the device and the electrical network may
employ a 3 meter long (max.) extension cable with a cross-section of 1.5
mm². The use of multiple plugs or gangs is prohibited because of the
danger of fire that is involved with this.
•
Make sure that the power cable is undamaged and has not been
installed under or over hot or sharp surfaces.
•
This unit is not designed to be installed in an RV or used with an
inverter.
•
The electrical safety of the device is only guaranteed if the device is
connected to a properly installed protective conductor system.
Operations using an electrical outlet without a protective conductor are
prohibited. If in doubt, have the house installation checked over by a
qualified electrician.
The manufacturer cannot be made responsible for damages that are
caused by a missing or damaged protective conductor.

13 Operation and Handing

This chapter provides you with important notices with regard to operating the
device.

13.1 Operating elements and displays

The device transmits the following signal sounds as an acoustic feedback
signal:
► Use the buttons
► Temperature recommendations: Red wine: 12°C – 16°C and white wine
6°C – 10°C.
► The display indicates the average temperature of the appliance at the
moment.
caso WineSafe 12 black
Please note
and to set the temperature in the range of 5-22°C.
33