The Handle Installing; Wine Shelves; To Remove A Shelf; Electrical Connection - Caso Germany WineDuett Touch 21 Mode D'emploi

13.5.2

The handle installing

13.5.3

Wine shelves

13.5.4

To remove a shelf

13.6 Electrical connection

caso Wine Duett
The wine cooler comes with 1 metal stainless steel handle. To
install simply screw them to the door with the supplied screws.
Remove all bottles from the shelves. Lift the shelf upwards and
the gently pull it out. Any of the wine shelves can be removed to
accommodate larger bottles.
Remove all bottles from the shelves. Lift the shelf upwards and
the gently pull it out.
► Ensure that the tabs are firmly engaged in place before
storing any bottles.
In order to ensure the safe and trouble-free operation of the
device, the following instructions must be observed for the
electrical connection:
• Before connecting the device, compare the connection data
(voltage and frequency) on the rating plate with those of your
electrical network. This data must agree in order that no
damages occur in the device. If in doubt, ask your qualified
electrician.
• The electrical outlet must be protected by a 16A safety cut-out
switch.
screw
Please note
Commissioning
handle
38