SEVERIN 7158 Mode D'emploi page 19

HV7158.book Seite 19 Dienstag, 19. April 2016 10:28 10
Charging and operating the appliance
Vacuum-cleaning with the floor nozzle
TIP: The floor nozzle can also be used without the suction tube in order to vacuum-clean fur-
niture, for instance. When doing so, make sure that the floor can withstand exposure to the
brush roller without sustaining damage.
Vacuum-cleaning hard floors
1. Attach the floor nozzle to the suction tube.
2. Press and hold
3. Vacuum-clean the floor.
4. Lift the floor nozzle from the floor.
5. Press .
- The brush roller switches on.
6. Press to switch off the appliance.
7. Empty and clean the dust bin (see chapter „Maintaining the appliance").
Vacuum-cleaning carpets
TIP: The floor nozzle can only be used to vacuum-clean short-pile carpets.
1. Make sure that the surface can withstand the brush roller without sustaining damage.
2. Press and hold
3. Press to switch on the brush roller.
4. Clean the floor.
5. Press to switch off the appliance.
6. Empty and clean the dust bin (see chapter „Maintaining the appliance").
For further information, see also illustrated Quick Start Guide.
Vacuum-cleaning with the 3-in-1 tool
TIP: The 3-in-1 tool can also be used without the suction tube in order to vacuum-clean fur-
niture, for instance.
1. Connect the 3-in-1 tool to the adapter and attach it to the suction tube.
2. Press and hold
3. Clean the floor.
4. Switch off the appliance
5. Empty and clean the dust bin (see chapter „Maintaining the appliance").
for more than 2 seconds to switch on the appliance.
for more than 2 seconds to switch on the appliance.
for more than 2 seconds to switch on the appliance.
.
19