Publicité
Les langues disponibles
Les langues disponibles
Operating the Mixer
Mixing a Drink
wWARNING
Cut Hazard
Always use metal container when mixing.
Do not put spoon or other utensils in metal
container when mixing.
Failure to follow these instructions can
result in cuts.
Mixing a Drink
You must read the "Mixer Safety" section before
using the mixer.
For best mixing results, use the Hamilton Beach
Universal Container (#110E). Do not use a paper
cup. The container fits the container guide which
starts the motor.
Using the Container Rest
Two-Position Container Rest
The top container rest position is used when mixing
with a standard container. In the top position, a
standard container will fit into the container guide
to lift the container guide pin against the actuator
switch, allowing the motor to run. To turn off the
motor, rest a standard container on the lower,
or standby, container rest position.
4
1. Plug mixer into a grounded outlet.
2. Place the ingredients into the container. The
basic milkshake recipe is:
• 3 No. 24 scoops of ice cream
• 4 ounces of very cold milk
• 1
1
⁄
ounces of syrup
2
3. Select the desired speed using the 3-speed
selector switch.
4. Position the container into
the container guide and
move the cup upward to
automatically turn the
motor on. Set the container
down onto the cup rest.
NOTE: You may also turn
the motor ON and OFF
using the pulse switch.
5. When the drink is completely mixed, lift the
container up off the cup rest and pull down
from the container guide. The motor will turn off.
NOTE: Inspect agitator(s) daily. Replace
agitator(s) every 90 days.
The lower container rest position may also be used
when mixing with larger containers, or for storing
standard containers when the mixer is not in use.
NOTE: When container is not positioned as
described above, you may also turn the motor on
using the pulse switch.
Publicité
