Connecting Other Interface Cables - Citizen CT-S851 II Mode D'emploi

3.7 Connecting Other Interface Cables

1. Turn off the power.
2. Orient the interface cable correctly and insert it into the interface connector.
Parallel interface
Front view
Pin
Powered USB interface
CAUTION
 Always unplug the AC adapter from the printer before connecting the
printer to a Powered USB interface. Failure to do so may damage the host
PC. For information about installing a Powered USB interface, contact your
Citizen Systems dealer.
 Check the orientation of the Powered USB cable connector before connecting it. Insert
it straight in so that the pins do not bend. Push it in until it clicks.
 When disconnecting the cable, always hold the connector.
 Be careful not to insert the USB interface cable into the cash drawer kick-out
connector.
 To connect more than one printer to a single computer via a USB interface you must change
the serial number of the USB interface.
USB interface (hub type)
— 32 —