Unold 68125 Notice D'utilisation page 37

the program time to 10 hours 30 minutes by repeatedly
pressing the TIME button. This is done by pressing the
„TIME +" and „TIME -" buttons. You can preselect a
maximum of 13 hours.
After the timer has been set, press the START/STOP button
to start the time-delayed baking program. The time symbol
flashes until the program starts. The time still remaining
will be shown in the display.
To interrupt the time pre-select, press the START/STOP
button for at least 3 seconds. You can then change the
time pre-select as needed, or start immediately with the
bread baking.
Please note:
When using the timer delay function, do not bake with
perishable ingredients, such as milk, eggs, fruit, yogurt,
onions, etc.
USER PROGRAM
The BACKMEISTER offers many programs, including a
®
program that we call the USER PROGRAM, it gives you the
opportunity to make your own program. You can change
the basic time and program phase settings as programmed
at the factory or leave out various program phases entirely.
This allows you to develop your own individual program
for baking bread or preparing dough. Below you will find a
sample recipe.
First you should become familiar with the following
information on the basic programming and use of the
USER PROGRAM.
The program features the following options:
Browning adjustable
Timer adjustable
Proceed as follows:
Select the desired phase with the SELECT button. Knead
1 and the programmed time 0:12 for this phase appear on
the display.
The set time can be adjusted with the buttons TIME + and
TIME -. Press the buttons repeatedly until the desired time
appears on the display.
Confirm the change with the SELECT button. Press
this button again and the next program phase and the
programmed time will appear on the display: „Rise 1" =
and 0:18.
If the adjacent maximum programmable time for the
respective program phase is exceeded by pressing the
buttons TIME + and TIME - „0" appears in the display.
This phase is then skipped during the program.
Every programmed setting must be saved by pressing the
SELECT button, so that programming for the next program
phase can be executed.
Once you have programmed all phases to suit your
preferences, conclude the programming by pressing the
START/STOP button. The programmed time for the user
program appears on the display. The program then starts
either immediately or after the time set via the timer
function.
Phase Pre-set
Total time 3:10 hours
1st kneading 12 minutes
1st rising 18 minutes
2nd kneading 15 minutes
2nd rising 85 minutes
3rd rising OFF/AUS
Baking 60 minutes
Keeping warm 60 minutes
CAUTION:
The appliance becomes very hot during
operation and maintains the heat during
some time after disconnection!
Copyright UNOLD AG | www.unold.de
Adjustable time frame
1-14 minutes
0-100 minutes
0-15 minutes
0-100 minutes
0-120 minutes
1-70 minutes
OFF/AUS/60 minutes
37