If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
OPERATION
After you connected the effect to the mains, the Foam Machine starts running.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Fluid consumption:
Dimensions:
Weight:
Accessory:
EUROLITE Concentrated foam, 5L
EUROLITE Concentrated foam, 25L
EUROLITE Concentrated foam, 200L No. 51707714
Please note: Every information is subject to change without prior notice. 14.10.2011 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
900 W
20 L per minute
880 x 580 x 620 mm
35 kg
No. 51707710
No. 51707712
13/23
00063281.DOC, Version 1.0