Setting The Clock; Cassette Player Operation; Listening To Tape Playback; Ejecting The Cassette - Sony XR-6600RDS Mode D'emploi

Setting the Clock

The clock has a 24-hour digital indication.
For example, setting it to 10:08
1
Display the time.
DSPL
(Press the button during the unit
D
operation.)
2
DSPL
Press the button for more than two
D
seconds.
1 0 0
The hour digit blinks.
Set the hour digits.
to go forward
to go back
1 0 0 0
3
Press the button momentarily.
SEL
1 0 0 0
The minute digit blinks.
Set the minute digits.
to go forward
to go back
1 0 0 8
DSPL
4
Press the button momentarily.
D
1 0 0 8
The clock activates.
Note
If the POWER SELECT switch on the bottom of the unit is
set to the B position, the clock cannot be set unless the
power is turned on. Set the clock after you have turned on
the radio, or started cassette playback.
Actual total number:
Cassette Player
Operation

Listening to Tape Playback

After inserting the cassette, playback
will start automatically.
If a cassette is already inserted, press
TAPE
the button to start playback.
If you press during playback, the tape
transport direction will change.
Indication of Tape Transport Direction
FWD
The side facing up is being played.
REV
The side facing down is being played.
To stop playback,
eject the cassette by pressing the
press the OFF button.
Playback stops also when you select radio by
pressing the
TUNER
Changing the Displayed Items
Each time you press the
displayed items change as follows:
z Tape playback
Frequency (activate the ATA function) "

Ejecting the Cassette

Press the button.
E
Sony XR-6600RDS ( ,F,G,I) 3-856-008-11 (1)
button or
button.
DSPL
button, the
D
z Time
EN
5