Setting the Clock
The clock has a 24-hour digital indication.
For example, setting it to 10:08
1
Display the time.
DSPL
(Press the
button during unit
D
operation.)
2
DSPL
Press the
button for more than two
D
seconds.
1 0 0
The hour digit(s) blinks.
Set the hour digits.
SEL
(to go back)
(to go forward)
1 0 0 0
3
Press the
SEL
button momentarily.
1 0 0 0
The minute digits blink.
Set the minute digits.
SEL
(to go back)
(to go forward)
1 0 0 8
4
DSPL
Press the
button momentarily.
D
1 0 0 8
The clock activates.
Note
If the POWER SELECT switch on the bottom of the unit is
set to the B position, the clock cannot be set unless the
power is turned on. Set the clock after you have turned on
the radio, or started cassette playback.
Actual total number
Cassette Player
Operation
Listening to Tape Playback
After inserting the cassette, playback
will start automatically.
To change the tape direction,
press both the 0 and the ) buttons at the
same time.
Indication of Tape Transport Direction
FWD
The side facing up is being played.
REV
The side facing down is being played.
Tape playback automatically changes
direction at the end of the tape.
Note
Before turning off the unit, eject the tape to avoid tape
damage.
Ejecting the Cassette
Press the
button to stop playback and eject
the cassette.
E
Sony XR-3690RDS (
,F,G,I) 3-856-275-12 (2)
EN
5