ALFRA TML 250 Mode D'emploi page 13

Technical data
Prod.-No.:
Designation:
Breakaway force:
Max. load-bearing capacity:
(on flat material
with safety factor 3:1)
Max. load-bearing capacity:
(at 6° inclination acc. to
EN 13155with safety factor 3:1)
Dead weight of the magnet:
Storage temperature:
Operating temperature:
Markings on the lifting magnet
There are additional detailed descriptions for handling and conditions of use on both sides of the lifting magnet.
This labelling must not be modified, damaged or removed, as otherwise the manufacturer is released from liability
for any personal injuries, property damage or accidents resulting from this fact. New labels must be ordered from
the manufacturer if necessary.
41250
TML 250 Lifting magnet
>750 kg on 10 mm S235
250 kg on 10 mm S235
230 kg on 10 mm S235
3,5 kg
-30°C to +60°C
-10°C to +60°C
ALFRA GmbH
>1650lbs on0,4" AISI CRS 1020
Colled Rolled Steel
550 lbs on0,4" AISI CRS 1020
Colled Rolled Steel
515 lbs on0,4" AISI CRS 1020
Colled Rolled Steel
7,7 lbs
-22°F to+140°F
+14°F to+140°F
13