ALFRA TML 250 Mode D'emploi page 11

Safety instructions
Danger can occur when transporting loads by lifting devices due to improper use and/or poor maintenance, which
may cause severe accidents and serious injury or even death. Please read and follow the operation and safety
information contained in this operating manual very carefully. If you have any questions, contact the manufacturer.
Always...

activate the lifting magnet completely

activate the lifting magnet on metallic, ferromagnetic materials

use the whole magnetic surface for lifting

lift on plane surfaces

check the magnetic holding force by lifting the load slightly by about 10 cm

clean the magnetic surface and keep it clear of dirt, chips, welding spatter

set the lifting magnet down gently to prevent damage to the magnetic surface

check the magnetic surface and the entire lifting magnet for damage

use suitable lifting gear

follow the instructions in the operating manual

instruct new users in the safe use of lifting magnets and read and understand the operating
manual

respect local and country-specific guidelines

keep and use in a dry environment
Never...

lift round or arched objects

lift more than the specified maximum load

transport loads above people's heads

lift several workpieces at once

switch the lifting magnet off until the load has been set down carefully

set the load swinging or stop it abruptly

lift loads which do not have the recommended sizes

lift loads with cavities, cut-out openings or drilled holes

lift uneven loads

turn loads from horizontal to vertical

turn the load hook under load

modify the lifting magnet or remove signs

use the lifting magnet when damaged or when parts are missing

strain the underside of the magnet through heavy impact or blows

stand under the lifted load

lift loads when there is someone in the hazard area

leave the lifted load unattended

use the lifting magnet without having been properly instructed

use the lifting magnet to support, lift or transport persons

operate the lifting magnet at temperatures above 60°C (140°F)

bring into contact with corrosive substances
People using pacemakers or other medical devices should not use this lifting magnet until
they have consulted with their physician.
11