Publicité
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
The plumbing codes applicable in the respective
countries must be observed.
The drain valve must only be used as intended. It
is not allowed to attach other objects to the drain
valve, for example a semi-pedestal.
If the instantaneous water heater causes prob-
lems or if you wish to increase the water flow, the
®
EcoSmart
(flow limiter) located behind the aerator
can be removed.
Technical Data
This mixer series-produced with EcoSmart
(flow limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
The product is exclusively designed for drinking water!
4
®
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 70°C
65°C
max. 70°C / 4 min
Assembly (see page 7)
English
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see page 9)
To adjust the hot water limiter. Using a hot
water limiter in combination with a continu-
ous flow water heater is not recommended.
Dimensions (see page 6)
Flow diagram
(see page 6)
Operation (see page 11)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Spare parts (see page 10)
XXX = Colors
000 = chrome plated
340 = Brushed Black Chrome
Special accessories
(order as an extra)
special tool #58085000 (see page 7)
Installation putty (see page 8)
Cleaning (see page 12)
Test certificate (see page 15)
®
with EcoSmart
without EcoSmart
®
Publicité
