Bosch GHO 40-82 C Professional Notice Originale page 13

OBJ_BUCH-633-005.book Page 13 Tuesday, March 25, 2014 9:45 AM
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Depth adjustment knob (insulated gripping surface)
2 Chip ejector (alternatively right/left)
3 Storage compartment for planer blade/
Allen key
4 Planing depth scale
5 Lock-off button for On/Off switch
6 On/Off switch
7 Belt cover
8 Screw for belt cover
9 Chip ejection selector lever
10 Planer base plate
11 V-grooves
12 Handle (insulated gripping surface)
13 Blade drum
14 Clamping element for blade
15 Fastening screw for planer blade
16 Carbide blade (TC)
17 Lateral blade-shaft protector
18 Allen key
19 Extraction hose (Ø 35 mm)*
20 Chip/dust bag*
21 Parallel guide*
22 Locking nut for adjustment of rebating width*
23 Fastening bolt for parallel and beveling guide*
24 Angle stop*
25 Locking nut for angle adjustment*
26 Fastening bolt for rebating depth stop*
27 Rebating depth stop*
28 Park rest
29 Service station*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Planer
Article number
Rated power input
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Bosch Power Tools
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 85 dB(A); Sound power level 96 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
a =7.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product
described under "Technical Data" is in conformity with the
following standards or standardization documents:
EN 60745 according to the provisions of the directives
2011/65/EU, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
GHO 40-82 C
0 601 59A 7..
0 601 59A A..
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
W 850
28.02.2014
W 450
-1
Assembly
min 14000
mm 0 – 4.0
 Before any work on the machine itself, pull the mains
mm 0 – 24
plug.
mm 82
Changing the Tool
 Be cautious when replacing the planer blades. Do not
kg 3.2
grasp the planer blades by the cutting edges. Possible
/II
danger of injury due to the sharp cutting edges of the plan-
er blades.
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
2 609 932 938 | (25.3.14)
English | 13