Recording From The Radio; Recording From Another Tape (Dubbing) - Sony MHC-W55 Mode D'emploi

continued
5
Press ENTER/NEXT.
The chosen track number lights up in
the music calendar and is memorized. If
the track number disappears before you
press ENTER/NEXT, go back to step 4.
6
Repeat steps 4 and 5 to programme the
remaining tracks you want to record on
side A in the order you want them to be
recorded.
7
Press P on the remote to pause
recording at the end of side A.
"P" appears in the display. The total
playing time "0.00" is displayed.
8
Repeat steps 4 and 5 to programme the
remaining tracks you want to record on
side B in the order you want them to be
recorded.
9
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side of
the tape, unless you change the playing
direction before recording.
GB
Make sure the tabs on the cassette have
not been removed.
18
10
Select dual or single-sided recording.
To record Press DIRECTION
MODE to select
One side of the tape A
Both sides* ß or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
11
Press CD SYNCHRO.
Deck B stands by for recording.
12
Press P PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press p on the tape player or the CD
player.
To check the order
Press CHECK repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel programme edit
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
Chapter 4: the Tape Player
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 10.
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE II (CrO
tape.
SYSTEM
POWER m ON
⁄
p
Æ
»
p
0 )
r P
⁄
5 6
DOLBY NR
1
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side of
the tape, unless you change the playing
direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press TUNER/BAND several times until
the desired radio band appears.
3
Tune in the radio station you want to
record. (See "Listening to the Radio", or
"Playing Preset Radio Stations" for
details.)
4
Select dual or single-sided recording.
To record Press DIRECTION
MODE to select
One side of the tape A
Both sides* ß or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5
Press r REC.
Deck B stands by for recording.
6
Press P PAUSE to release recording
pause.
Recording starts.
To stop recording
Press p on the tape player.
To reduce noise during AM recording
If a whistling noise is heard while
recording, reorient the AM loop aerial for
optimum reception.
) To activate DOLBY NR
2
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 4.
2
Recording From
Another Tape
(dubbing)
» P
Dubbing Another Tape
»
Automatically
Æ
p
p
0 )
You can record the whole tape onto another
⁄
automatically by using high speed dubbing.
Use the buttons on the unit to do this
1 4
operation and TYPE I (normal) or TYPE II
(CrO ) tape for dubbing.
2
SYSTEM
POWER m ON
Æ
»
p
0 )
⁄
1
1
Press § EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
» P
⁄
p
»
Æ
p
p
0 )
r P
⁄
3 4 1 2