Assembly / Operation - Hailo ProfiLOT Manuel D'utilisation

6. Assembly / operation

6.1 Set-up options (schematic diagram):
A - Free-standing step ladder with
single ladder attached (3-section)
B - Free-standing stepladder (2-section)
C - Free-standing stepladder
with step adjustment (2-section)
D - Single ladder (1-section)
E - Single ladder (2-section)
F - Single ladder (3-section)
6.2 Function of the LOT system
With the aid of the LOT system, the ladder can be
positioned and set up vertically if the ground has different
height levels. Ground unevenness can be compensated
for up to a height of 15 cm (ProfLOT system) or 10 cm
(HobbyLOT system).
1. Open foot pedal [A-3] and adjust ladder element [A-1].
2. Close foot pedal and check ladder for secure footing
before using.
6.3 Adjustment and locking mechanism
with locking hooks
The ladder or a ladder element is locked on a ladder
rung using the pair of locking hooks [D]. The anti-lift
security device [D-1] on the locking hock secures the
ladder against unintentional movement and serves as
a transport lock.
1. Pull up on the anti-lift security device [D-1] on the
locking hook [D] and lift the ladder slightly to unlock it.
The ladder elements can now be moved; the single
ladder [G] can be separated from the stepladder if
necessary.
2. Before using the ladder, the locking hooks must be
correctly positioned on the ladder rung and the anti-lift
security device [D-1] must be automatically engaged.
6.1
6.2
6.3
GB
1.
2.
1.
2.
27