INFOSEC UPS SYSTEM E4 LCD TT Série Manuel Utilisateur page 83

Battery type
Number
Long-run
model (S)
Charging current (max.)
Charging voltage (max.)
DISPLAY
LCD screen
ALARMS
Battery mode
Overload
Battery not connected
PHYSICAL CHARACTERISTICS
Standard Dimensions HxWxD (mm)
Model Net weight (kg)
Dimensions HxWxD (mm)
Long-run
model (S) Net weight (kg)
ENVIRONMENT
Humidity / Temperature
Noise level
MANAGEMENT / COMMUNICATION
RS232 & USB communication ports
Optional SNMP
Dry contacts
Software
NORMS
Standard
EMC
Low voltage (safety)
WARRANTY
Warranty
* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
**If the UPS is installed or used in a place where the altitude is above 1,000m, the output power must be derated one percent per 100m.
***Product specifications are subject to change without further notice.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 14 AA 59 203 47
Depending on applications
4.0 A ± 10% 4.0 A ± 10%
UPS status, load level, battery level, Input/Output voltage,
discharge time and fault conditions
Sounding every 4 seconds
826 x 250 x 815
109
826 x 250 x 592
38
<95 % RH @ 0- 40°C (without condensation)
<60dB at 1
Meter
Supports Windows family, Novell, Linux, Mac and FreeBSD
Power management from SNMP manager and web browser
Dry contacts communication card for remote alarm
EN62040-1-1/2003,2006/95/EC
18 – 20
4.0 A ± 10%
273 VDC ± 1%
Sounding every second
Sounding every second
164
40
<65dB at 1 Meter
InfoPower
EC
EN62040-2/2006
2 years
12.0 A ± 10%
1000 x 300 x 815
109
826 x 250 x 815
38
82