Operating Your Pressure Washer; Mounting Of Spray Lance; Water Connection - Nilfisk P 160.2-15 SUPER PRO X-TRA Notice D'utilisation

5 Operating your pressure washer

5.1 Mounting of spray lance

5.2 Water connection

Original Instructions
A
B
NOTE!
Always remove any dirt from
the nipple before connecting
the spray lance to the spray
handle.
An ordinary 1/2" garden hose of
min. 10 m and max. 25 m will
be suitable.
1. Pull the blue quick-release
grip (A) of the spray handle
backwards.
2. Insert the nipple of the spray
lance (B) into the quick-re-
lease connection and release
it.
3. Pull the spray lance forwards
to check that it is securely
attached to the spray handle.
NOTE: Connec-
tion to the public
mains according
to regulations.
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of silt, sand or
sediment in the inlet water (i.e.
from your own well), an addi-
tional fi lter should be mounted.
1. Let the water run through
the water hose before con-
necting it to the machine to
prevent sand and dirt from
penetrating the machine.
Note: Check
that the fi lter is
fi tted in the water
inlet pipe and that it is clean
and free from debris.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 60°C).
3. Turn on the water.
FR
EN
31