Transporting The High Pressure Washer; Electrical Connection - Nilfisk P 160.2-15 SUPER PRO X-TRA Notice D'utilisation

machine.
• Wear shoes with non-slip soles.
• Wear goggles, ear protection and protective clothes dur-
ing operation.


Transporting the high pressure washer

• When transporting the machine in or on a vehicle, it must
be secured, e.g. with straps, so that it cannot slip or tip
over.
• Nilfi sk recommends that the machine is positioned hori-
zontally on the backside, when transported in or on a ve-
hicle.
Detergents
• This machine has been designed for use with cleaning
agents supplied or recommended by Nilfi sk. The use of
other cleaning agents or chemicals may adversely affect
the function of the machine.


Before starting the work
Inspecting the machine
• Do not use the machine if a supply cord or important
parts of the machine are damaged, e.g., safety device,
high pressure hose, and spray handle and spray attach-
ments.
• The trigger of the spray handle must move easily and au-
tomatically return to its starting position when released.
• Always keep high pressure hose and spray attachment
in good condition (clean, moving easily) and correctly as-
sembled.

Electrical connection

Minimize the risk for electrical shock:
• Voltage and frequency of the machine (see rating plate)
must match the voltage of and frequency of the mains
supply.
• Only connect the machine to electrical installation made
by a certifi ed electrician and com ply with IEC 60364-1.
Original Instructions
WARNING!
FR
EN
25