Install Crank Handle For High Pressure Hose Reel; Fit Clamp For High-Pressure Jet Tube; Fill Up Detergent Tank 1); Fill Up Tank For Nilfisk-Alto Antistone - Nilfisk ALTO NEPTUNE 4 FA Notice D'utilisation

NEPTUNE 4 FA
3.3 Install Crank handle
for high pressure hose
1)
reel
3.4 Fit clamp for high-
pressure jet tube
3.5 Fill up detergent tank
3.6 Fill up tank for Nilfisk-
ALTO AntiStone
6
Ø
1.
2.
1)
1. Pull cap of crank in arrow di-
rection.
2. Align tabs on crank with slot
in axle.
3. Put crank on axle of high
pressure hose reel.
4. Fix crank by pushing the
cap.
1. Insert clamp into the
ø
holder on the sliding
guard:
High-pressure
jet lance
1. Fill up detergent tank with
prediluted detergent.
Capacity see chapter 9.4 Tech-
nical Data
1. Fill up Nilfisk-ALTO Anti-
Stone/water softener reser-
voir with the sample bottle
provided. Nilfisk-ALTO Anti-
Stone prevents any deposits
of scale and acts at the same
time as a corrosion inhibitor.
For compatibility reasons, use
only the tested „Nilfisk-ALTO
Anti-Stone". Order the refill pack
in good time (Order no. 8466, 6
x 1 l).
clamp
1)
1) Options / model variants