Safety Recommendations For The Operator; Appropriate Operation - Julabo TW2 Mode D'emploi

Safety recommendations for the operator

 You received a product conceived for industrial use. Nevertheless, avoid strikes to the
housing, vibrations, damages to the keypad foil (keys, display) or contamination.
 Make sure the product is regularly checked for proper condition. Regularly check (at least
every 2 years) the proper condition of the mandatory, warning, prohibition and safety
labels.
 Take care that the mains supply features a low impedance to avoid any negative affects
on the instrument being operated in the same mains.
 This unit is designed for operation in a controlled electromagnetic environment. This
means that transmitting devices (e.g. cellular phones) should not be used in the
immediate vicinity. Magnetic radiation may influence other units with components
susceptible to magnetic fields (e.g. a monitor). We recommend to keep a minimum
distance of 1 m.
 Permissible ambient temperature: max. 40 °C, min. 5 °C.
 Permissible relative air humidity: 50 % (40 °C).
 Do not store in an aggressive atmosphere. Protect from contaminations.
 Do not expose to sunlight.

Appropriate Operation

Only qualified personnel is authorized to perform configuration, installation, maintenance and
repairs of the water bath.
Routine operation can also be carried out by untrained personnel who should however be
instructed by trained personnel.
Use:
Insufficient ventilation may result in the formation of explosive mixtures. Only use the unit in
well ventilated areas. The unit is not for use in explosive atmosphere.
JULABO water baths have been designed for temperature application to water in a bath tank.
The bath may not be filled with flammable materials. Fire hazard!
Only use non-acid and non corroding bath fluids.
Water Baths
27