Operator Responsibility - Safety Recommendations; Safety Recommendations For The Operator - Julabo PURA 4 Mode D'emploi

Operator responsibility – Safety recommendations
3 Operator responsibility – Safety recommendations
Pos: 9 /T echnische Do kum entation/Flash CORIO/PURA/Sicherh eitshinweis e, U mgang @ 1 \mod_1 457 536 074 654_ 18.docx @ 933 7 @ 22 2 @ 1
3.1

Safety recommendations for the operator

The products of JULABO GmbH warrant a safe operation if installation,
operation and maintenance are carried out according to common safety
regulations. This section informs you about potential dangers that may
arise from operating the circulator and also mentions the most important
safety precautions.
The operator is responsible for the qualification of the personnel
operating the units.
Make sure that the person who operates the water baths are instructed
in the respect of the work.
The operator should be constantly informed about the dangers involved
with their job activities as well as preventive actions.
Make sure all persons expected to carry out operation, installation and
maintenance of the unit read and understand the safety information and
operating instructions.
If you have any questions concerning the operation of your unit or the
information in this manual, please contact us!
•
You received a product conceived for industrial use. Nevertheless,
avoid strikes to the housing, vibrations, damages to the keypad foil
(keys, display) or contamination.
•
Make sure the product is regularly checked for proper condition.
Regularly check (at least every 2 years) the proper condition of the
mandatory, warning, prohibition and safety labels.
•
Take care that the mains supply features a low impedance to avoid
any negative affects on the instrument being operated in the same
mains.
•
This unit is designed for operation in a controlled electromagnetic
environment. This means that transmitting devices (e.g. cellular
phones) should not be used in the immediate vicinity. Magnetic
radiation may influence other units with components susceptible to
magnetic fields (e.g. a monitor). We recommend to keep a minimum
distance of 1 m.
•
Permissible ambient temperature: max. 40 °C, min. 5 °C.
•
Permissible relative air humidity: 50 % (40 °C).
•
Do not store in an aggressive atmosphere. Protect from
contaminations.
•
Do not expose to sunlight.
29