Novy Pure'line Compact 6710 Instructions D'installation page 13

2 ACCESSORIES
Flexible duct
In order to simplify the installation, it is advisable to make
the final piece between the flat duct work and hood from
flexible, flat exhaust duct (906.408).
Recirculation
If you choose recirculation, Novy offers the outlet box in
various sizes, including type 841.400 / 842.400 / 843.400
or type 7931.400 / 7932.400 / 7933.400.
Accessories flat exhaust duct
− Flexible exhaust tube length 750 mm
− Flat exhaust channel duct1000 mm
(dimensions: 89x222x1000 mm)
− Connection piece (dimensions:
94x227x80 mm)
− Horizontal curve
(dimensions: 94x227x290 mm)
− Vertical curve
(dimensions: 94x175x227 mm)
− Curve 15°
(dimensions: 94x227x138 mm)
− Corner adapter
(dimensions: 94x227x205 mm)
− Transition piece to Ø150 mm
(dimensions: 94x227x190 mm)
− Wall conduct kit for for flat exhaust duct
89x222mm including built-in heat retention
non-return valve
− Stainless Steel blind grill with non-return valve
(dimensions: 290 x 160 mm)
Accessories circular exhaust tube
− Circular exhaust tube
length 1000 mm Ø150 mm
− Connection piece Ø150 mm
− Curve 90° Ø150 mm
− Aluminium external grill for Ø150 mm
− Wall conduct kit for ducting Ø150 mm including
built-in heat retention non-return valve
− Non-return valve Ø150 mm
General accessories
− Hose clamp adjustment Ø60-215 mm
− Aluminium tape roll 50 m
− Stainless steel cleaner: maintenance product
for cleaning the stainless steel
Intouch
InTouch offers you the possibility to control the Novy
cooker hood from the Novy InTouch induction cooking
plate. The ceiling hood may, as a default, be combined
with InTouch induction cooking plates.
Visit the website for the different models of induction
cooking plates with InTouch.
Window switch
This hood is equipped with a connection for a con tact
window switch. If the hood is to work simultane ously with
a heating appliance that pulls air from the room, and if
the required supply of fresh air can only be through an
open window, it is possible to connect a window contact
switch (not supplied) to the hood.
This ensures the hood only works if the window is open.
When the window is closed, the fan can not be turned on.
A window contact cable set is available as an accessory
(part number 990.033). Using the cable set, it is possible
to make a connection between the hood controller to the
outside of the hood. A window contact switch can then
be connected (not included).
906.408
Further information on Novy products, accessories and
906.401
services may be found on the internet:
www.novy.co.uk
906.402
906.403
906.404
906.418
906.405
906.406
906.425
906.407
906.415
906.417
906.416
906.178
906.420
906.432
906.291
906.292
906.060
13