Bosch GST Professional 160 CE Notice Originale page 13

OBJ_BUCH-2000-004.book Page 13 Monday, January 25, 2016 6:24 PM
Action
Mounting the metal overshoe
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate prese-
lection
Switching the Power Tool On/Off
Guide the power tool toward the
workpiece only when switched on
Switching the worklight On/Off
Lubrication when cutting metal
Plunge Cutting
Selecting Accessories
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Regularly spray penetrating oil onto the saw blade holder (see
figure 16, page 194).
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 17, page 194).
Bosch Power Tools
Figure Please observe
6
7
8
9
10
11
12
13
14
–
After-sales Service and
Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
English | 13
Page
188
189
189
190
190 –191
191
192
192
193
195 –197
1 609 92A 2BW | (25.1.16)