Demo (Demonstration) Mode - Vintec A18342801 Guide D'utilisation Et D'entretien

Demo (Demonstration) mode

This feature is programmed to show
different displays of the unit; however,
since unit will not activate the compressor,
the unit will not cool. Demo mode is used
for commercial purposes.
To activate/deactivate Demo mode,
simultaneously press and hold the Mode
and light buttons for 10 seconds.
When activated, the display shows
alternatively "dE" and "On" for 5 seconds.
Any alert turns off temporarily.
To keep communicating that the machine
is in Demo mode, every 5 minutes, on
Single, the display shows alternatively "dE"
and "On" for 5 seconds.
When deactivated, on Single, the display
shows alternatively "dE" and "OF" for 5
seconds. Any alert turns off temporarily.
Control Sounds
Simultaneously press and hold the lower
temperature set and light buttons for 5
seconds to activate/deactivate Control
Sounds.
Controls and Settings
will be illuminated.
Door open alert
When the door stays open for 5 minutes
or more, the door open icon turns On
and the lights start to dim and an alarm
sounds.
Any interaction on the Control panel will
disable the alarms. The icon stays on as
long the door is open.
The default
setting for Control
Sounds is On.
Press once to
toggle the display
between 'OF' and
'On'. The 'OF' or
'On' will display
for 2 seconds
then the display
switches back
to the previous
temperature
setting.
High / Low
temperature
alert
If a malfunction
causes an either
too high or too low
temperature inside
the cabinet, then
the display on the
control panel will
indicate either "Hº"
or "Lº" (High or
Low temperature)
and the alert icon
17