Leveling; Leveling The Unit; Leveling Legs - Vintec A18342801 Guide D'utilisation Et D'entretien

14 Leveling

Leveling the Unit

Position the unit on a flat, level surface capable of supporting the entire weight of the unit
when full.

Leveling Legs

Adjustable legs at the front and rear corners of the appliance should be set so the
unit is firmly positioned on the floor and level from side to side and front to back. The
overall height of your Vintec appliance may be adjusted between the minimum, 33 ¾"
(85.7cm),by turning the leveling leg in and the maximum, 34 ¾" (88.3cm), by turning the
leveling leg out.
To adjust the leveling legs, place the appliance on a solid surface and protect the floor
beneath the legs to avoid scratching the floor. With the assistance of another person,
lean the appliance back to access the front leveling legs. Raise or lower the legs to the
required dimension by turning the legs. Repeat this process for the rear by tilting the
appliance forward using caution. On a level surface check the appliance for levelness
and adjust accordingly.