Switching On Or Switching Off Condensation Protection; Theater Mode; Setting The Temperature Unit; Setting The Language - Thermador T36IT901NP Guide D'utilisation Et D'entretien

Switching on or switching off
condensation protection
This function is only available with 3-door
appliances. 3-door appliances are equipped with a
door pillar featuring condensation protection.
You can open the left-hand door of the refrigerator
compartment without opening the right-hand door
beforehand.
9
CAUTION
Never unfold the door pillar when the door is
open!It can get jammed when closing the door
and become damaged, or itself damage the
front panel of the right-hand door.
A heater is built into the door pillar to prevent
condensation. Switching condensation protection on
or off switches the heater on or off.
~ "Settings menu" on page 10
Press the " button to open the Settings menu.
1.
Use the < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press the > button to move to the menu item
4.
Prevent condensation.
To change the setting, press the : button.
5.

Theater mode

If Theater mode is switched on, the light will slowly
become brighter when the appliance is opened, and
then slowly darker when it is closed.
Switching Theater mode on or off
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button to open the menu item.
3.
Use ) button to move to the menu item Theater
4.
mode.
Press : button to open the menu item.
5.
Use ) button to move to the menu item On or Off.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.
Operating the appliance en-us

Setting the temperature unit

You can choose between the unit °C and °F.
1 ° means 1 °F
1 °C means 1 °C
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Use ( button to move to the menu
4.
item Temperature unit.
Press : button.
5.
Use ( ) buttons to move to the required unit.
6.
Press 8 button.
7.
The unit will be changed.
Press ; button to exit the menu.
8.

Setting the language

Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ( button to move to the menu item
4.
Language.
Press : button.
5.
Use ( ) buttons to move to the required language.
6.
Press 8 button.
7.
The display restarts, and the start screen is
displayed.

Home network

You can use this function to establish a connection
between the refrigerator and your mobile device.
~ "Home Connect" on page 19
17