Fitting; Fitting Mechanical Components - Festo DGCI Notice D'utilisation

DGCI−...
5

Fitting

Fitting mechanical components

Please note
Incorrectly parametrized positioning drives can perform sudden unexpected
movements.
S Use the DGCI only with the specified mounting positions and parameters
(è Drive−specific information on the controllers).
S Observe the mounting requirements and instructions specified especially in
the manuals for the controllers used.
Leave all screws and threaded bolts in their original states, unless you are
S
requested to modify them in these instructions.
Avoid the band system becoming
S
damaged or excessively dirty.
Damage to the band system can cause
leakage and reduce the efficiency of the
DGCI.
Make sure that the device is fitted free of
S
mechanical stress and distortion.
Festo DGCI−... 0612NH English
Fig. 6
Fig. 7
29