Accessories; Standard Accessories; Optional Accessories - Hitachi DH 28PD Mode D'emploi Et Instructions De Securite

English
WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Plastic Case (Code No. 330220) ............................................................................................................... 1
(2) Side Handle (Code No. 330208) .............................................................................................................. 1
(3) Stopper (Code No. 982671) ..................................................................................................................... 1
(4) Cover (Code No. 331730) ......................................................................................................................... 1
(5) Rubber cap (replacement) (Code No. 331731) ...................................................................................... 1
OPTIONAL ACCESSORIES ................. sold separately
1. Drilling anchor holes (Rotation + Hammering)
Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank)
External dia. Code No.
7/16"
944460
(11 mm)
1/2"
944461
(12.3 mm)
1/2"
993038
(12.7 mm)
9/16"
944462
(14.3 mm)
9/16"
944500
(14.5 mm)
11/16"
944463
(17.5 mm)
7/8"
944464
(21.5 mm)
18

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use
replacement parts or accessories which are not intended for use with this tool. Contact
HITACHI if you are not sure whether it is safe to use a particular replacement part or
accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury
or mechanical damage.
(2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)
Taper mode
Morse taper
(No. 1)
Morse taper
(No. 2)
A-taper
B-taper
Code No. Applicable drill bit
Drill bit
303617
(Taper shank)
Drill bit
303618
(Taper shank)
Taper shank adaptor formed A-taper or B-
303619
taper is provided as an optional accessory,
but drill bit for it is not provided.
303620
7/16" (11 mm)
1/2" (12.3 mm)
1/2" (12.7 mm)
9/16" (14.3 mm)
9/16" (14.5 mm)
11/16" (17.5 mm)
7/8" (21.5 mm)