Description - Nilfisk RS 1300 Mode D'emploi

Masquer les pouces Voir aussi pour RS 1300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

DESCRIPTION

Description of the control area
(See Fig. D)
1.
Meter and control panel
2.
Indicator light panel
3.
Lifted hopper warning light (red)
4.
High beam indicator light
5.
Running light indicator light
6.
Turn signal indicator light
7.
Charged battery indicator light
8.
Engine oil pressure warning light
9.
Engine coolant high temperature warning light
10.
Low fuel warning light
11.
Glow plug pre-heating warning light
12.
Parking brake warning light
13.
Clogged engine air fi lter warning light
14.
Water-in-fuel warning light
15.
Fuel level indicator
16.
Engine coolant temperature indicator
17.
Display showing:
Working hours (when the ignition key is turned on the
fi rst position, before running the engine)
Engine speed (when the engine is running and the
charged battery warning light is off)
The display can also show the following acronyms:
F.OPE: it indicates that the fuel level indicator cable is
not connected
F.COr: it indicates that the fuel level indicator cable is
shorted
H.OPE: it indicates that the engine coolant temperature
indicator is not connected
H.COr: it indicates that the engine coolant temperature
indicator is shorted
18.
Left vent
19.
Ceiling light: If pressed on the right or left side, it turns on.
In central position, it turns off.
20.
Hazard warning light switch
21.
Hopper lid opening/closing switch
22.
3rd broom tilting switch
23.
Right vent
24.
Ignition key
25.
3rd broom rotation direction selector
26.
Drive pedal
27.
Dust control system water pump switch:
When the switch is turned to the fi rst position, the
nozzles sprinkle a medium quantity of water
When the switch is turned to the second position, the
nozzles sprinkle the maximum quantity of water
28.
Steering wheel
29.
Side brooms (fi rst position) and 3rd broom (second
position) switch
30.
Suction fan/optional equipment switch
31.
Brake pedal
32.
Windscreen wiper fl uid tank
8
INSTRUCTIONS FOR USE
33015124(3)2008-02
Windscreen wiper switch
33.
In 0 position: windscreen wiper stopped
In 1 position: windscreen wiper moving
In 2 position (with spring-return): windscreen washer jet
34.
3rd broom arm extension shifting switch (with spring-
return)
35.
Combination switch, having the following functions:
Headlights off, with mark (35b) at the symbol O
Running lights on, with mark (35b) at the symbol
Low beam on, with mark (35b) at the symbol
High beam on, with mark (35b) at the symbol
lowered lever (35a)
High beam temporary on, lifting the lever (35a)
Right turn signal on, bringing the lever (35a) forward
Left turn signal on, bringing the lever (35a) backward
Horn activation, pushing the lever (35a) in the direction
shown by the arrow (35c)
36.
Suction inlet, brooms, hopper joystick
37.
Suction inlet and side broom lowering push-button
38.
Suction inlet and side broom lifting push-button
39.
Hopper return push-button
40.
Hopper dumping push-button
41.
Suction inlet and side broom left shifting push-button
42.
Suction inlet and side broom right shifting push-button
43.
Hopper lifting push-button
44.
Hopper lowering push-button
45.
Safety push-button (press and hold it to activate the other
push-buttons on the joystick)
46.
3rd broom joystick, to activate the following functions (after
pressing the 3rd broom switch):
Forward: 3rd broom lowering
Backward: 3rd broom lifting
Right side: arm to the right side
Left side: arm to the left side
47.
Skirt lifting push-button
48.
Skirt lowering push-button
49.
Full water tanks warning light (green)
50.
Full water sub-tank warning light (yellow)
51.
Empty water tanks warning light (red) (the pumps stop
automatically)
52.
3rd broom working light switch
53.
Closed hopper lid warning light
54.
Warning decal
RS 1300
and

Publicité

Table des Matières
loading

Table des Matières