Product Presentation; General Description - ADEUNIS TEMP V3 LoRaWAN 863 Guide Utilisateur

TEMP V3 LoRaWAN 863-870 - Guide utilisateur / User guide version V3.0.0

1. PRODUCT PRESENTATION

IMPORTANT NOTE: The TEMP V3 LoRaWAN 863-870 can be started with a magnet or switching the product in PRODUCTION mode using the
IoT Configurator.
Description :
• The adeunis® LoRaWAN TEMP is a ready-to-use radio device enabling temperatures to be measured and transmitted by wireless commu-
nication network.
• This product exists in 2 versions: one including an ambient probe and a remote probe and a second one with two remote probes.
• These two products answer the users need to monitor the temperature (ambient or contact) of a storage room, cold room or all rooms
needing a product able to withstand more or less harsh environment.
• The use of the LoRaWAN protocol allows the user to integrate the TEMP V3 LoRaWAN 863-870 into any network that is already deployed.
• The product emits the data from the sensors either periodically or in an event-based way based on top and/or bottom thresholds.
• The configuration of the transmitter is accessible by the user via a micro-USB port or via the network, allowing in particular a choice of
modes of transmission, periodicity or triggering thresholds.
• The TEMP V3 LoRaWAN 863-870 is powered by a replaceable internal battery.
IMPORTANT NOTE : The LoRaWAN TEMP is delivered by default with OTAA configuration, allowing the user to declare the product to a
LoRaWAN operator.
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate, cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs

1.1. General description

Base casing
2 holes for
passing collars
through
4 fastening holes
Casing base detail
Cables outlet
packing gland
35 of 51
FR
EN