Registers And Frame Description; Configuration And Installation; Installation Of The Remote Probe - ADEUNIS TEMP V4 IP68 LoRaWAN 863-870 Guide Utilisateur

TEMP V4 IP68 LoRaWAN 863-870 - Guide utilisateur / User guide version V3.1.1
LEDs scenario for a sensor configured in Class A OTAA:

3. REGISTERS AND FRAME DESCRIPTION

To know the content of the registers and of each frames (uplink and downlink) of the product, refers to the TECHNICAL REFERENCE MANUAL
of the TEMP product, available on the adeunis website:

4. CONFIGURATION AND INSTALLATION

4.1. Configuration and installation of the transmitter
To configure the product, it is recommended to use the IoT Configurator (android and Windows application).
- Google Play : https://play.google.com/store/apps/details?id=com.adeunis.IoTConfiguratorApp
- Windows 10: https://www.adeunis.com/telechargements/
To install the product, please refers to the INSTALLATION GUIDE adeunis® available on the website.

4.2. Installation of the remote probe

To ensure an optimal performance of the remote probe, please, follow the installation recommendations here-after:
• Install the contact probe on the surface to monitor
• Place the probe to be sure that it is the reinforced section that is in contact with hot surfaces and not the wire (cf illustration hereunder)
• Use the appropriate fixation for the monitored surface (thermal paste, heat resistant collars etc.)
WARNING : the probe must be manipulated at room temperature, risk of damage if handled in negative temperatures or above 90°C.
https://www.adeunis.com/en/produit/temp/
FR
EN
57 of 61