Features; Assembly - Ryobi RY40809 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Motor .................................................................. 40 Volt DC
Clearing Width ............................................................ 18 in.
Clearing Depth ........................................................... 10 in.
KNOW YOUR SNOW BLOWER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
BATTERY COVERS
The battery covers protect the battery ports from moisture
and debris.
BATTERY STORAGE
The battery storage area offers a convenient place for stor-
ing your battery when not in use, or to store an extra battery
pack.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

Wheel Size .................................................................. 10 in.
Throwing Distance ............................................. Up to 25 ft.
BRUSHLESS MOTOR
This product features a brushless motor that maximizes
power and performance as well as battery run time.
CHUTE DEFLECTOR HANDLE
The chute deflector handle allows you to change the distance
that snow will discharge from the chute.
CHUTE ROTATION HANDLE
The chute rotation handle allows you to choose the direction
that snow will discharge from the snow blower. The handle
allows the chute to rotate up to 180º.
LED HEADLIGHTS
LED headlights are located on the front of the unit to illumi-
nate your path in low light conditions. The lights will operate
whenever the motor is running.

ASSEMBLY

PACKING LIST
Snow Blower
Chute Deflector
Chute Rotation Handle
Hardware Bag
Assembly Tool
Operator's Manual
WARNING:
To avoid the risk of injury, do not operate without dis-
charge chute in place.
WARNING:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
6 — English