Features; Assembly - Ryobi RYAC804 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Input ........................................................................................................................... nominal 120V/60Hz AC only, 10 Amps
Clearing Width ................................................................................................................................................................ 12 in.
Clearing Depth ............................................................................................................................................................... 10 in.
Impeller Size ................................................................................................................................................................... 10 in.
KNOW YOUR SNOW SHOVEL
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the packing list
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Snow Shovel
Operator's Manual
WARNING:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.

FEATURES

CORD RETAINER
The cord retainer helps prevent accidental unplugging of
the extension cord.
LOCK-OUT BUTTON
The lock-out button prevents accidental starting.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
CONNECTING THE SHAFTS
See Figure 2.
When removed from the box, the upper and lower shafts
are connected by an electrical cord. Before using the snow
shovel, a one-time assembly is required.
 Loosen the knob on the lower shaft.
 Align the button on the upper shaft with the pin hole on
the lower shaft. Insert the upper shaft into the lower shaft
and slide together until you hear the button click.
 Tighten the knob securely.
WARNING:
Be certain the knob is fully tightened before operating
equipment; check it periodically for tightness during use
to avoid serious personal injury.
7 — English