Télécharger Imprimer la page

Technical Data; Assembly; Prior To Initial Commissioning - Gloria MULTIBRUSH li-on Mode D'emploi

Masquer les pouces Voir aussi pour MULTIBRUSH li-on:

Publicité

Les langues disponibles

Les langues disponibles

4

Technical data

MultiBrush li-on
Item number(s):
Battery
Type:
Nominal voltage:
Rating:
Charging station
Input voltage:
Output voltage:
Power:
Battery charging time: 35 - 75 Min.
Dimensions & Rotational speeds
Device width:
Device height (min):
Device height (max):
Rotational speed of joint brush:
Rotational speed of surface brush:
Device weight with joint brush:
Device weight with surface brush:
Hand-Arm vibration value:
Sound pressure level L PA :
Sound power level L WA :
5

Assembly

Figures 1 - 6
NOTE!
Your device is supplied with the
1
surface brush pre-assembled.
Loose parts supplied must be
as sembled accordingly when working
with the joint brush.
After removing from the packaging,
loosen screw connection (G)
Next, turn handle (A) 45° as shown in
fig ure
and adjust the length of
3
the telescopic tube (F) according to
your body height, as illustrated.
5 locking positions are available.
In the selected position, turn handle
4
(A) a further 45° and tighten the
height of the telescopic tube (F) with
the screw connection (G) by hand.
000292.0000; 000292.0001; 000292.0005; 000292.0300; 000292.0400
Lithium-ion
18.0 V
4.0 Ah
100-240 V~ / 50/60 Hz
12-20 V / DC / 4 A
110 W
Surface brush 24.0 cm // Joint brush 28 cm
Surface brush 1.15 m // Joint brush 1.04 m
Surface brush 1.35 m // Joint brush 1.24 m
630 rpm to 1260 rpm
450 rpm to 900 rpm
2.7 kg without battery / 3.4 kg with battery
3.4 kg without battery / 4.1 kg with battery
< 3.1 m/s
77 dB
90 dB
.
2
28
2
(+/- 1.5 m/s
2
)
As the device should always be
guided and operated with two
hands, fit the additional handle (E) as
shown in the figure
height and screw the additional
handle (E) tightly into place
6

Prior to initial commissioning

WARNING! BEFORE USE OBSERVE
CHAPTER 2 "FOR YOUR SAFETY".
You should therefore observe the
following safety instructions:
The mains voltage must be in com-
pliance with the voltage specifica-
tion (V~) on the type plate of the
charger.
Use only the supplied charger with
corresponding original Li-Ion bat-
tery. Operate charger only in dry
rooms.
, adjust the
5
.
6

Publicité

loading

Ce manuel est également adapté pour:

000292.0000000292.0001000292.0005000292.0300000292.0400