InnoCigs STEAMAX GX2/4 Manuel D'utilisation page 68

STEAMAX GX2/4 – SELECTION & OPERATING OF THE MENUS
In "TEMP MODE, " press the fire button to select the "STRENGTH" of the pull between 15 and 220 watts or 350
watts. Then select the coil type of your atomizer head TC-Ni (Nickel200), TC-Ti (titanium) or TC-SS (stainless
steel) and adjust the temperature coefficient of the resistor by pressing the adjustment buttons.
Recommended TC R values for different materials:
Material
TCR value range
Menu 2 – Manage Number of Puffs
When you select Menu 2, the symbol
down the Fire button to enter the submenu displaying the current and maximum number of puffs. Press the
"UP" or "DOWN" button to adjust your settings: In the "MAX" submenu, set the maximum number of puffs
between 0 and 999. "NEVER" represents an unlimited number of puffs. "ALREADY" represents the puffs already
made. You can reset the counter reading by waiting for 5 seconds until "PUFFS RESET Y/N" appears on the
display. Select Y to reset it to 0.
66
www.steamax.com
Nickel
0.00600-0.00700
will be shown on the display. Just wait 5 seconds or press and hold
Titanium
0.00300-0.00400
SS
0.00080-0.00200